Important notice: Counterfeit products have been reported. Only products with a valid seal are genuine. Report a product →
Official authentication

Product Authentication

Make sure your product is genuine. It only takes a few seconds.

10 characters, letters and numbers, found under the silver scratch area.

No personal data is required or stored.

How it works

  1. 1

    Locate the seal

    The authenticity seal is affixed to the packaging of your product. Scan its QR code with your phone camera to open this verification page.

  2. 2

    Reveal your code

    Gently scratch the silver area with a coin or fingernail to reveal your unique 10-character code.

  3. 3

    Verify

    Enter the code in the field above and select Verify. The result appears instantly; dashes are optional.

Example of a genuine BIOTECH seal: brand name above the QR code, and the code printed vertically under a silver scratch strip.

What a genuine seal looks like

  • 1 · SCAN above the QR code and BIOTECH VERIFY printed below it.
  • An upright silver scratch strip that is intact until you scratch it.
  • Underneath, a code with 10 characters, printed vertically in two groups of five (XXXXX-XXXXX).
  • A small horizontal seal, about 22 × 15 mm.

If the silver area was already scratched when you received the product, or the seal shows any sign of tampering, please contact us before relying on the product.

Understanding your result

Genuine

The code exists and this is its first verification. Your product is original.

Already verified

The code was checked before. If it wasn't you, it may have been copied. Please report it.

Not found

Check the code and try again. If it still fails, the product may not be genuine.

Found something suspicious?

Tell us what happened and, if you can, send a photo of the seal. Every report helps us stop counterfeits.

Report a product

Report a product

Your report goes straight to the BIOTECH team. We will reply by email.

Photo of the seal or package (optional, up to 5 MB)